ETU PENDANT

By KAIA

Inspired by old laboratory glassware this glass globe pendant is a celebration of pure and simple forms. 

A metal counter-conholding the light is fixed inside the glass and held in place by a set of small screws and a slim brass stem. Celebrating the beauty of function is important to KAIA, which is why ETU’s stripped-back construction is proudly displayed for all to see.

Designed by Peter Straka
Handmade by KAIA

Need a replacement lamp?

DOWNLOADS

PRODUCT SPECIFICATIONS

Dimensions:

350 mm (13.87 in)

Weight:

6 kg (13.78 lb)

MATERIALS & FINISHES

ETU PENDANT is made from Solid brass and available in the following finishes:

170 01 201 - Brushed nickel
170 01 207 - Oiled and waxed brass
170 01 209 - Black matte
170 01 208 - Bronze / Patinated brass

Clear crystal glass as standard, smokey grey and ocean blue glass available on request.

If you require a different length or finish, please contact sales@kaialighting.com

DELIVERY & RETURNS

For ‘off-the-shelf’ Goods purchased through Our Site, the Goods will normally be delivered within one – four weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For ‘customised line’ Goods purchased through Our Site, the Goods will normally be delivered within eight – fourteen weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For more information, please refer to our trade B2B and retail B2C Terms and Conditions.

MOUNTING INSTRUCTIONS

Before commencing installation ensure the relevant mains supply has been safely isolated/disconnected . Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, including factory made connections.

1. Fix the ground plate with screws to the ceiling.
2. Screw into the bulb.
3. Carefully secure the metal cone into the glass sphere.
4. Fix loosely all the supplied screws by hand into position. Do not use a screwdriver.
5. Put the stem through the ceiling rose.
6. Thread the cables through the ball joint and screw
the stem into the ball joint. After that connect the
cable with the clamp on the ground plate.
7. Lastly fix the ceiling rose with the knurled screw.

CARE INSTRUCTIONS & PATINATION